1.Unique structure,reasonable design,max opening degree is 180°,it is very easy to operate.
2.Use the digital display tempreture control system,the tempreture's error exactly is ±1°.
3.Pre-adjust the pressure,change th pressure freely.
4.CE certification,single-LED display integrated automatic electronic timing,it will automaticly warns after finishing the process.
5.Use the good heat aluminum plate,electronic tube and heat plate are casting as one makes the heat uniform and durable.
6.Telfon coated on the surface of heat aluminum plate,it is very convinient to clean.
7.With high tempreture elastic silicone pad to keep it not deform when it gets 400 degrees.
Specific Operating
1.Connect the plug with 220v,open the power switch,then its indicator lights(Attention:the whole machine must have the
protecting ground wire.)
2.Adjust the needed tempreture(actually 180-200°) and time(actually 40-45s)
Tempreture sets up:press the push botton of SET one time,it shows SP station,then press + or - to set the needed
tempreture,finish the adjusting tempreture
Time sets up:press the push botton of SET the second time,it shows the SF station, then press + or - to set the needed tempreture,finish the adjusting time,then press SET push botton return to the warming interface.
3.Put the clothes on the silicone pad,then put the picture on the clothes,with the handle forced under pressure until
it is completely closed;(the press is no more than 30kg,otherwise the handle will be deform)
4.When the time is up,the warning buzzers,then put the handle back into place;
5.If the transfer paper is the hot one,pls tear it up at once;
If the transfer paper is the cold one,pls tear it up after 10-15seconds.
